Effect of iron on mineral composition of quaternary phase clinker and its hydration properties

Journal of Thermal Analysis and Calorimetry - The present task is to investigate the influence of iron on the mineral composition and microstructure of the phase Q (C20A13M3S3, in the text below...     

Renormalization Group Analysis of Models of Advection of a Vector Admixture and a Tracer Field by a Compressible Turbulent Flow

Theoretical and Mathematical Physics - Using a quantum field theory renormalization group, we consider models of advection of a vector field and a tracer field by a compressible turbulent flow....     

The spectral analysis and exponential stability of a bi‐directional coupled wave‐ODE system

In this paper, an unstable linear time invariant (LTI) ODE system is stabilized exponentially by the PDE compensato—a wave equation with Kelvin‐Voigt (K‐V) damping. Direct feedback connections between the ODE system and wave equation are established: The velocity of the wave equation enters the ODE through the variable v_t(1,t); meanwhile, the output of the ODE is fluxed into the wave equation. It is found that the spectrum of the system operator is composed of two parts: point spectrum and continuous spectrum. The continuous spectrum consists of an isolated point , and there are two branches of asymptotic eigenvalues: the first branch approaches to , and the other branch tends to ?∞. It is shown that there is a sequence of generalized eigenfunctions, which forms a Riesz basis for the Hilbert state space. As a consequence, the spectrum‐determined growth condition and exponential stability of the system are concluded.     

Precise Synthesis of Poly(thioester)s with Diverse Structures by Copolymerization of Cyclic Thioanhydrides and Episulfides Mediated by Organic Ammonium Salts

The precise synthesis of poly(thioester)s with diverse structures is still a significant challenge in the polymeric materials field. Herein, we report a novel approach to the synthesis of well‐defined poly(thioester)s by the controlled alternating copolymerization of cyclic thioanhydrides and episulfides induced by simple organic ammonium salts. Both the cation and anion have strong effects on the copolymerization. [PPN]OAc ([PPN]=bis(triphenylphosphine)iminium) with a bulky cation was proven to be efficient in initiating this polymerization, yielding poly(thioester)s with a completely alternating structure, controlled molecular weight, and narrow polydispersity. The poly(thioester) obtained from succinic thioanhydride and propylene sulfide is a typical semicrystalline material, possessing a high refractive index of up to 1.78. Because it uses readily available monomers, this method is expected to open up a new route to poly(thioester)s with diverse structures and properties.     

Tuning the Reactivity of Cyclopropenes from Living Ring‐Opening Metathesis Polymerization (ROMP) to Single‐Addition and Alternating ROMP

Ring‐opening metathesis polymerization (ROMP) has become one of the most important living polymerizations. Cyclopropenes (CPEs) remain underexplored for ROMP. Described here is that the simple swap of 1‐methyl to 1‐phenyl on 1‐(benzoyloxymethyl)CPEs elicited strikingly different modes of reactivity, switching from living polymerization to either selective single‐addition or living alternating ROMP. The distinct reactivity stems from differences in steric repulsions at the Ru alkylidene after CPE ring opening. Possible olefin or oxygen chelation from ring‐opened CPE substituents was also observed to significantly affect the rate of propagation. These results demonstrate the versatility of CPEs as a new class of monomers for ROMP, provide mechanistic insights for designing new monomers with rare single‐addition reactivity, and generate a new functionalizable alternating copolymer scaffold with controlled molecular weight and low dispersity.     

保温层结构对感应加热制备太阳能级多晶硅影响的数值模拟研究

定向凝固技术是制备太阳能级多晶硅的主要制备技术.在该技术路线之中,优化多晶铸锭炉的热场结构和控制硅熔体的对流形态是获得高品质多晶硅的有效途径之一.本文设计了三种热场保温层,通过分析不同保温层下坩埚内硅熔体的热场、流场、固液界面、氧含量等的变化,确定了优化的保温层结构.研究发现,在传统固化碳毡保温层中引入石墨层可以使多晶炉内形成两个“热源”,提高多晶炉的热效率,使其能耗降低了38.5;;在洛伦兹力的作用下硅熔体中仅存在一个上下贯通的涡流,有利于硅中杂质原子的挥发.同时,添加石墨保温层后固液界面的形状由“W”状转变为凹状,其上的氧含量有所降低,并且V/Gn值在整个固液界面范围内均大于临界值,可以有效抑制氧沉淀.可见,在感应加热多晶硅生长系统中,采用固化碳毡+石墨保温层时,有利于降低多晶硅的生产成本并提高多晶硅的品质.     

Demonstration of joule-level chirped pulse amplification based on tiled Ti:sapphire amplifier

A novel tiled Ti:sapphire(Ti:S)amplifier was experimentally demonstrated with>1 J amplified chirped pulse output.Two Ti:S crystals having dimensions of 14 mm×14 mm×25 mm were tiled as the gain medium in a four-pass amplifier.Maximum output energy of 1.18 J was obtained with 2.75 J pump energy.The energy conversion efficiency of the tiled Ti:S amplifier was comparable with a single Ti:S amplifier.The laser pulse having the maximum peak power of 28 TW was obtained after the compressor.Moreover,the influence of the beam gap on the far field was discussed.This novel tiled Ti:S amplifier technique can provide a potential way for 100 PW or EW lasers in the future.     

γ-Valerolactone (GVL) as a green and efficient dipolar aprotic reaction medium

The great challenge for modern research is to define the most efficient tools to make more sustainable the industrial production and manufacturing. Among the different aspects that require attention the replacement of toxic and/or non-renewable solvents it is certainly playing a crucial role. Dealing with widely used dipolar aprotic solvents, among the different alternatives proposed in the literature γ-valerolactone (GVL) plays a pivotal role covering different application area. In this contribution, the benefits derived from the use of GVL as a circular, safe, biomass-derived reaction medium are highlighted covering most recent publications (2021). The presentation has been divided into three major sections: (i) biomass valorization, (ii) materials synthesis, manufacturing and recycle and (iii) new synthetic methodologies.     

基于错位格雷码的动态三维形貌测量方法

格雷码辅助相移技术可以实现具有较强鲁棒性与抗噪能力的三维（3D）形貌测量。为解决由待测物体不均匀的表面反射率、噪声和物体运动等因素造成的级次边沿误码问题，提出了一种基于错位格雷码的动态3D形貌测量方法。将传统格雷码图案在投影前预先移动半个条纹周期得到错位格雷码图案，再采用传统格雷码解码方法对二值化后的错位格雷码图案解码，可得到与截断相位完全错开的解码结果。对该解码结果进行修正后即可利用得到的正确的相位级次辅助截断相位成功展开。同时，为了提高测量精度，引入了一个虚拟相位平面以进一步拓展投影条纹周期数。实验结果表明，所提方法在使用N帧格雷码图案的情况下，可以编码周期数为2^N+1的投影条纹进行3D测量，其无需任何附加图案即可避免级次边沿误码问题，并有效提升了测量精度。复杂动态场景的3D重建结果证明，所提方法能够以2381 frame/s的速率实现高精度、高效率和高速的3D形貌测量。     

Tuning Emission Wavelength of Polymorphous Crystal via Controllable Alkyl Chain Stacking and Its Vapor- and Thermo-Responsive Fluorescence

Tuning fluorescence colour of solid-state materials has become a topic of increasing interest for both fundamental mechanism study and practical applications such as sensors, optical recording and security printing. In this work, a fluorescent colour tuneable molecule BA-C16 is rationally designed and facilely synthesized by attaching flexible long alkyl chains to 2-hydroxybenzophenone azine ( BA ), which shows both aggregation-induced emission (AIE) and excited-state intramolecular proton transfer (ESIPT) characteristics. Compared to BA , the simple introduction of long alkyl chains in BA-C16 leads to an emission wavelength redshift from 542 to 558 nm. This strategy of extending emission wavelength is rarely reported, and is ascribed to the enlarged through-space π-conjugation between interplanar molecules in the aggregate of BA-C16 . Three crystals of BA-C16 are obtained with green, yellowish green and yellow emission. According to characterization by X-ray crystallography, X-ray powder diffraction and differential scanning calorimetry, alkyl chains play an important role in inducing different stacking modes of the three crystals, which further leads to polymorph-dependent fluorescence colour. BA-C16 exhibits tuneable solid-state fluorescence upon vapor fumigation, or annealing based on a transition between a “near-monomer” crystalline state and a “dimer” crystalline state. BA-C16 is further applied for rewritable fluorescence printing tuned by vapor- and thermal-treatment.